2" 0.5 HP Submersible Solids Handling Pump Voltage: 115

SV400-115 Voltage: 115 Features: -Vortex Impeller. -Handles solids. -Non-clog trash pump. -304 Stainless steel motor housing. Material: -Stainless steel. Generic Specifications: -115 Volt / 7.5 Amps. -230 Volt / 3.8 Amps. -230V pumps do no include plugs. Plugs need to be supplied by others. Generic Dimensions: -Cable Length: 33'. -Weight: 40 lbs.. Dimensions: Overall Height - Top to Bottom: -15.8 Inches. Overall Width - Side to Side: -8.5 Inches. Overall Product Weight: -40 Pounds.

• Longer Power Cord: Standard 33ft. power cord
• 304SS Motor Housing: Superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water.
• Three Seal Motor Protection: Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
• More Motor Protection: Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation. Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on.
• Tough Pump Construction: Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components .