Optex OVS-01CC 26 Foot Range Microwave Vehicle Presence Sensor with Car Counting

The Optex 26-Foot Range Microwave Vehicle Presence Sensor with Car Counting detects the presence of moving or stationary vehicles all while having the ability to ignore human movement. It uses doppler shift and FMCW (Frequency-Modulated Continuous-Wave) detection technologies to count moving vehicles, and unlike other vehicle sensor units, it installs above the ground. This eliminates the hassles associated with installing a ground loop. You won't have to worry about cutting concrete or having to stop traffic through your driveway during installation.The Optex 26-Foot Range Microwave Vehicle Presence Sensor with Car Counting has a detection range of 3 to 26 feet and can detect vehicles with speeds ranging from 1 to 37 mph (2 to 60 km/h). It also features 5 selectable menu settings options to ignore human movement.Detects moving or stationary vehicles and uses doppler shift and FMCW detection technologies to count vehiclesIgnores human movement with 5 selectable menu setting optionsBuilt-in heater reduces snow on the sensor (automatically activates based on the outside air temperature)Installs above ground and is not affected by underground obstructionsNo ground loop necessary for installationInstallation DetailsThe sensor easily mounts 2 to 3 feet off the ground and wires directly to the gate operator. No additional loop detector, need for special programmers, or need to stop traffic through the driveway during installation are required. A simple to use menu with visual indicators provides a simple and quick installation.ContentsVehicle Presence Sensor(4) ScrewsInstallation ManualNote: Always install the sensor on the vertical pole that is mounted in or on the ground. Installing a sensor on a tilted pole will result in a detection of the ground by the ultrasonic sensor and correct operation is not ensured.Technical DetailsManufacturer Part #: OVS-01CCUPC: 788924092164Detection Method: Microwave (Doppler shift and FMCW)Frequency: 24GHzResponse Time: 300msecPower Supply: 12-24VDCCurrent Consumption:Max 200mA (at 24VDC) with Heater ONMax 80mA (at 24VDC) when Heater is OFFOutput 1: Relay output DC20V, 0.3A (NO/NC selectable)Output 2: Relay output DC30V, 0.3A (NO/NC selectable)Input: NO/NC inputDetection Range: 3 feet to 26 feet (1 to 8m) Programmable maximum rangeDetectable Vehicle Speed: 1 mph-37 mph (2 to 60 km/h)Parameters:Sensitivity: Level 1 to 5 (inc. Human Cancel Adjust.)Output 1: NO/NCOutput 2: NO/NCMax. Range: 3/7/10/13/16/20/23/26 feet (1/2/3/4/5/6/7/8 m)Indicator:Normal Operation: Stand-by: Solid Green, Detection: Solid RedDetection Area Check:Non-detection: Blinking GreenDetected: Blinking YellowCalibration: In calibration: Fast blinking blueSensor Reset: Reset completed: Blinking yellow for 2 secondsHuman Cancellation: Available from Level 1 to 5Operation Temperature: -22°F to 122°F (-30°C to 50°C)Operation Humidity: 95% max. (non-condensing)International Protection Code: IP65Installed Condition: Indoor/OutdoorInstallation Height: Installation Height of 20 inches (500mm)Horizontal Angle Adjustment: Horizontally: ±30 deg. (5 deg. steps)Weight: 480g (Including accessories)Credentials: FCC

• Detects moving or stationary vehicles and uses doppler shift and FMCW detection technologies to count vehicles
• Ignores human movement with 5 selectable menu setting options
• Built-in heater reduces snow on the sensor (automatically activates based on the outside air temperature)
• Installs above ground and is not affected by underground obstructions
• No ground loop necessary for installation