SSCYHT Car Traffic Arrow Flashing Light Guide Warning Indicator, Traffic Consultant Led Directional Arrow Light,24v,60cm

Feature:The Circuit Board Adopts Double-layer Technology and is Resistant to High Temperature;The Flash Controller Adopts the Imported Switch Tube, Which is Stable and Reliable. the Illuminating Pixel is Composed of 8 F5 Lamp Beads and 14 Mil Large-size Chips, and the Power Supply is Independent. the Illuminating Pixel is Equipped with an Electroplating Reflector, Which Greatly Increases the Effective Flash Distance; the Arrow Light is a New Type of Vehicle Traffic Signal.The Set Guide Light Consists of a Left Arrow and a Right Arrow and a Control Box.The Appearance is Exquisite and Beautiful, the Operation is Simple, and the Installation is Convenient.The Biggest Advantage is That the Overall Weight is Light and the Power Consumption is Low.Long Service Life and Long Viewing Distance.Arrow Lights Are Widely Used, Such As Engineering Rescue Vehicles, Sprinklers,Road Construction Vehicles, Road Maintenance Vehicles, Road Sweepers and Road Warning Signs.Technical Parameter:Working Voltage: Dc12v/24vColor: YellowWorking Current: Less Than 6aWorking Power: Less Than 25wFlashing Frequency: 60-100 Times / MinuteSize: 600mm × 260mm × 50mmWeight: 6.5kgTraffic Consultants Are a Common Type of Transportation Equipment. It Matches the Car's Power Supply and Has a Flashing Led Light. It is Used As a Warning and is Mainly Used for Road Construction or Road Works. Suitable for Road Construction Guides, Sprinklers, Sanitary Sweepers, Flashing Lights, Warning Lights.

• LED LIGHT: a group of 8 LEDs, a total of 80 groups, using imported ultra-high brightness LED lights, brightness greater than 12000mcd, small operating current, stable performance, long life, visual distance of 1500 meters.
• MATERIAL: The outer casing is made of PC material for integral injection molding and has good anti-aging and anti-seismic properties. The bracket is made of cold-rolled steel, has high-temperature paint, no rust, and the screw is made of stainless steel. The flash controller adopts the imported switch tube, which is stable and reliable.
• BLINKING MODE: blinks left, blinks right, blinks left and right, you can turn the switch on or off as needed.
• TECHNICAL PARAMETERS: working voltage: DC12V 24V, working current: less than 6A, working power: less than 25W, flashing frequency: 60-100 times / minute. Equipment installation: Connect directly to the vehicle battery (circuit) and determine the voltage before installation.